The high-response proportional variable pump system makes the output from the hydraulic system of the injector matched with its overall operation without the loss of energy overflowed under high pressure. Compared with those standard models, it has the superior performance price ratio, saves the energy by 25%-50%, and has the obvious cost performance. The oil pump of greater displacement can be equipped for motor of the same power, to accelerate the overall unit, shorten the molding period, reduce the investment for cooling facilities in the factory building at the same time, prolong the service life of those sealing parts (oil seal, O ring) at low temperature, minimize the break-down repair, and save a lot of maintenance expenses.

Clamping force          800 KN

Opening stroke         270 mm

Max.mold height       300 mm

Min.mold height        135 mm

Screw diameter        30   34   40   42    mm

Screw L/D Ratio       23   20   19   18    mm

Injection Pressure    220 172  125 112   Mpa

Shot weight(ps)        88  113  156  172    g

                              3.1  4.0   5.5   6.0    OZ

Injection rate            39   51   63   77    g/sec

Plasticizing capacity 10   13   23   28    g/sec

Screw stroke                 140    mm

Screw speed                 150    rpm

Dry-cycle time               1.2     sec

Oil tank capacity            150    L

Machine weight              3.0     T

Dimensions(L*W*H)       3.8*0.94*1.7    m